Aluminum welding is a valuable skill in industries ranging from automotive to construction, due to aluminum’s lightweight and corrosion-resistant properties. Welding aluminum is challenging, but with proper tools and techniques, strong, durable welds are achievable. In this guide, we’ll break down how to weld aluminum, with a focus on MIG welding, the appropriate gases to use, and finding reliable aluminum welding near me.
How To Weld Aluminum With A MIG Welder?
MIG welding, or Metal Inert Gas welding, is one of the most effective methods for welding aluminum, especially for those who are new to welding. Welding aluminum with a MIG welder requires specific techniques and adjustments for a successful weld.
First, using a spool gun is essential, as it helps feed the soft aluminum wire without tangling. Set the welder to a higher amperage since aluminum melts faster than steel, and increase the wire feed speed to match. It’s crucial to thoroughly clean the aluminum surface with a stainless steel brush to remove any oxide layer that could contaminate the weld.
When welding, use a push technique—pushing the gun instead of pulling it—to ensure better penetration and reduce porosity. Maintaining a steady travel speed is also important to prevent burn-through, as aluminum conducts heat faster than most metals. Here are the key steps:
-
Use a Spool Gun
Aluminum wire is softer than other metals, and it can easily become tangled in a standard MIG wire feeder. A spool gun, which feeds the wire directly into the welding area, helps prevent tangling and ensures a smoother weld.
-
Adjust Your MIG Welder Settings
Set the welder to a higher amperage than you would for steel, as aluminum requires more heat to weld effectively. You’ll also need to increase the wire feed speed, as aluminum melts faster than steel.
-
Clean the Aluminum Surface
Aluminum oxide forms quickly on the surface of aluminum, and it melts at a much higher temperature than aluminum itself. Before welding, thoroughly clean the metal surface with a stainless steel brush to remove the oxide layer and prevent contamination.
-
Maintain a Steady Speed
Aluminum conducts heat faster than steel, so it’s important to maintain a steady speed while welding to avoid burn-through. Keep the welding gun close to the workpiece and move at a consistent pace.
-
Use the Right Technique
A push technique is recommended when MIG welding aluminum. This means pushing the weld pool away from the weld bead, rather than pulling it, which helps reduce porosity and ensures better penetration.
How to Weld Aluminum with TIG Welder?
Welding aluminum with a TIG welder requires precision and control to achieve clean, high-quality welds. Here’s how you can weld aluminum using the TIG welding method:
-
Choose the Right Tungsten Electrode
Use a pure tungsten or a tungsten alloy electrode with a pointed tip. For aluminum, an AC (alternating current) setting is preferred on the TIG welder, which helps break up the aluminum oxide layer and stabilize the arc.
-
Prepare the Aluminum
Aluminum needs to be thoroughly cleaned before welding to remove any oxide layer. Use a stainless steel brush to scrub the surface and clean off any grease or contaminants. This ensures a smooth weld without impurities.
-
Set Your Welder
TIG welding requires an AC setting, specifically for aluminum. Adjust the amperage to suit the thickness of the material. Thicker aluminum requires more heat, while thinner pieces need lower amperage to prevent burn-through.
-
Use 100% Argon Shielding Gas
As with MIG welding, 100% argon gas is the recommended shielding gas for TIG welding aluminum. Argon creates a stable arc and prevents oxidation, leading to a cleaner weld.
-
Control the Heat
Aluminum dissipates heat quickly, so you must balance your heat input. Begin by creating a weld pool, and then dip the filler rod into the molten aluminum as you proceed. Too much heat can cause the material to warp or burn through, so maintaining control is crucial.
-
Employ the Right Technique
The TIG torch should be held at a 10-15 degree angle, with the filler rod kept close to the weld pool. Move steadily to avoid overheating any section of the aluminum, and add the filler material in a smooth, consistent motion.
By following the above steps, you can create precise, strong welds on aluminum with a TIG welder, which is ideal for high-quality and detailed work.
What Gas Do You Use For Aluminum Welding?
The type of shielding gas you use is crucial to the success of aluminum welding. For MIG welding aluminum, 100% Argon is the preferred choice. Argon creates a stable arc, prevents oxidation, and ensures smooth, clean welds.
For thicker pieces of aluminum or more advanced applications, you can use a mix of argon with helium to achieve deeper penetration. Helium increases the heat in the weld pool, making it ideal for heavy-gauge aluminum, but in most cases, pure argon works perfectly for general applications.
Hiring Aluminum Welding Near Me
If you’re looking for professional aluminum welding services nearby, it’s essential to choose a trusted and experienced welder who understands the intricacies of aluminum welding. Minhas On-site Welding offers specialized aluminum welding services, including mobile solutions that come directly to your location.
Whether you need aluminum welding for repairs, fabrication, or custom projects, Minhas Mobile Welding provides quality and precision you can rely on.
Conclusion
Welding aluminum can be intimidating, but with the right tools and proper techniques, it’s entirely manageable. Whether you’re using a MIG welder with a spool gun or ensuring you have the proper shielding gas, paying attention to details will ensure strong and smooth aluminum welds.
For expert assistance, contact a professional aluminum welder near me, like Minhas Welding, for all your welding needs.
Follow my blog with Bloglovin